You are here
Home > Conveyor systems > Workplace Safety: The Do’s and Don’ts around a Conveyor System

Workplace Safety: The Do’s and Don’ts around a Conveyor System


Conveyor systems are important in many industries. Nevertheless, they may be also an origin of mishaps, a few of which are catastrophic. This means that safety around conveyor systems is paramount if you’re to fight these incidents. This informative guide will take a look at the dos and don’ts that will keep the conveyors running while also having every person in the workplace protected.

Do Hold Clothing Away

It’s really simple for loose pieces of clothing to get trapped in the conveyor roller. You should let only specific staff manage the system. Other than clothing, ensure that everyone with long hair has it neatly kept in place. Lastly, have jewellery such as rings, necklaces and wrist watches aside when working.

Don’t Ride The Conveyor

Riding the conveyor line could be fun but it is extremely hazardous. In fact, do not climb, sit or stroll on this system at any time. Note that when these conveyors were being built, they were by no means built with people in mind and thus were by no means designed to deal with the human weight. As a result, it really is extremely simple for belts to go out of track.

Do Ensure A Clear Start-up

A lot of industrial accidents that happen near a conveyor system could be connected to its launch. Even though many of these sound an alarm prior to coming on, it is imperative that you stay away of the area. As a supervisor, ensure that every person inside the plant is aware of the significance of the alarm system to keep injuries away.

There’s lots of Roller Drive online sites in England, if you are searching to find out more or costs this website is a popular kick off point

Do Not Service The Conveyor Before Disconnecting Power

Any routine maintenance activities have to wait for the unit to get turned off from power. Regardless of whether your conveyor relies on electricity, hydraulic or air, make sure that the cut-off is in position to stop anybody from accidentally turning it back on. There are a number of lockout systems which you can employ to take care of this.

Do Master The On/off Controls

Any person who works near this system should know where the emergency on / off controls are located. These controls also have to be clearly marked to make it easy for anyone to easily see them and make use of them whenever the need arises.

Don’t Change Controls

It’s recommended that only certified personnel be permitted to make any modification around the controls. It’s also pertinent that you monitor them so that you can recognize misuse or any slight changes by your staff. Although some tasks might need that you change these controls, it is still not recommended to do so since these controls are part of a bigger system and doing adjustments can lead to other unexpected issues.